5/4/09

Tune Bios to Boot Faster

Base boot computer must all start at the main bios that computer manufacturers will set to stable on most systems. Command to boot from drive cd-rom then boot from harddisk or force cpu enable feture low-power. The adjustment of these result in each boot computer usually take more time should not be.



I recommend technical refinements which bios is the basic of the computer to speed up the boot.

Boot from harddisk.

Setting the bios boot from cd-rom to make it easy for users to manually install Windows, however the actual use. Users not installing Windows every time. However, the boot sequence will reduce speed of boot because need to read data from cd-rom before to read data from the harddisk.



That is why must be set to boot from the harddisk before the cd-rom or set to boot only the harddisk with easy steps.



1. When you restart your computer press [Delete] button to enter to set bios.
2. Select Boot Menu or Boot Option.
3. Press [F5] or [F6] button for change boot sequence to boot from the harddisk first or boot only harddisk.
4. Press [F10] to save and exit.



Note : Each computer will have a different button for enter the bios. When you restart computer just look area under the logo, which will notify you that button.

Warn : If you change the boot sequence and then can not boot your computer. Go to bios setup and then press [F10] button to exit and select Load Setup Defaults to restore the normal setting.

Disable feture low-power.

Feture low-power will reduce cpu speed in case of not heavy use, but these feture will pull performance as the cause of the cpu does not work in full performance.

1. When you restart your computer press [Delete] button to enter to set bios.

2. Select menu Advance.

3. enter Feture low-power and select Diable it.

4. Press [F10] to save and exit.

Note : After you tune bios with 2 techniques, you must restart your computer more 2 times to see the result.

No comments:

Post a Comment